|
Part#: PL-2301A
Model: Amplus
See manual
here
SMA to TNC Adapter included. Works on routers
which either is SMA or TNC connector
|
SMA Connectors |
Male central Pin |
Female central Receptacle |
Inside Thread
(outer nut/shell) |
SMA Plug / SMA Male |
Reverse SMA Plug / Reverse SMA Male / RP-SMA
Male |
|
Outside Thread |
Reverse SMA Socket / Reverse SMA
Female / RP-SMA
Female |
SMA Socket / SMA Female |
Description:
POWERLINK Amplus is an indoor solution 1W
bi-directional Booster designed for 2.4GHz wireless LANs. This unit comes with
an easy plug-and-play installation, which works together with an indoor Wireless
Access Point to improve its operation range and performance.
POWERLINK Amplus is ideal for use with 2.4 GHz
frequency hopping or direct sequence spread spectrum radio modems and 802.11b/g devices.
POWERLINK Amplus increases range by providing
transmit gain as well as low-noise receive gain. This receive gain increases the
receive sensitivity of wireless LAN Access Point. Full output power of 1W is
achieved with only 5mW input into the Booster.
Features:
-
Fits on routers with TNC & SMA
connector
-
Cast Aluminum Construction
-
Power and transmit LEDs
-
15dB transmit gain (adjustable)
-
Lightning Protection
-
High Gain, High Value, High
Performance
-
Increase range of low powered
radio modems/routers
Antenna
Specifications:
Booster Specifications:
|
Operating Range |
2400-2500MHz |
|
Operating Mode |
Bi-directional, hale-duplex, time division duplex senses
RF carrier from transmitter and automatically switch receiving to
transmitting mode |
|
Connector Type |
SMA Receptacle(50 ohm) or TNC |
|
Input power |
8~17dBm (Warning: Input power more than 17dBm that power
amplifier may breakdown) |
|
Transmit Gain |
10-16dB |
|
Output power |
1.0W Max |
|
Receiver Gain |
≤14dBm |
|
Noise Figure |
3.5dB |
|
Frequency Response |
±1dB over operating range |
|
Power Adapter |
5-6V 1A /DC 105-240V for AC adapter |
|
Operating Temp. |
-20 to +70°C |
|
Operating Humidity |
Up to 95% relative humidity |
|
Material |
Cast Aluminum |
|
ALC Control Limit |
30dBm |
|
Transmit indicator LED |
Green: downlink active
Red: uplink active
Green and Red flash: downlink and uplink both are working* |
|
Power and ALC indicator LED |
Green on: ALC inactive
Green flash: ALC active (warning)**
Red on: Power is working normally
Red off: No power or device not working |
|
Booster Dimension |
8.5cm(L)*5.6cm(W)*2.6cm(H) |
|
Package |
22cm(L)*15cm(W)*4cm(H) |
|
Safety Certification |
FCC/CE |
* When Transmit indicator LED "Green and Red are flashing", it
means the device is working properly.
**When Power and ALC (Auto Limit Control) indicator LED is
"flashing Green", it is a warning sign for over loading. it might cause overheat
and damage of the device. Please disconnect the device such as Router or AP.
Package Content:
-
1W Booster/Amplifier
-
AC adapter (110~240V input)
-
RG316 Cable (30cm) (Connector: RP-SMA Male to SMA
Male)
-
SMA to TNC Adapter (SMA-Male to TNC-Female)
-
5dBi Antenna
-
Manual
Warranty: 1 year
|
